Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 645 G10. Confirm the exact model on the service label before starting.
HP EliteBook 645 G10 Notebook PC display panel replacement. HP prints this procedure on printed page 63 of its maintenance and service guide, and the spare-part table for this part is on printed page 63.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 39). (printed page 42).
- Take the bottom cover off (the Bottom cover section is on page 39). (printed page 42).
- Detach the battery lead from the main board (the Battery section is on page 49). (printed page 42).
replacement
- Take the power connector lead (the Power connector lead section is on page 62). (printed page 63).
Part numbers in our catalog
- HP FHD 400 nit display panel (N42803-001)
- HP FHD 250 nit display panel (N42802-001)
- HP FHD 250 nit touch display panel (N00080-001)
- HP FHD privacy display panel (N00079-001)
- HP 14-inch HD display panel N00083-001 (N00083-001)
- HP Ambient light sensor, not illustrated N00883-001 (N00883-001)
- HP Display panel tape N39006-001 (N39006-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-645-g10-display-panel-replacement-p63