Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 645 G10. Confirm the exact model on the service label before starting.
HP EliteBook 645 G10 Notebook PC solid-state drive replacement. HP prints this procedure on printed page 47 of its maintenance and service guide, and the spare-part table for this part is on printed page 21.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M52027-001- 2 TB, TLC. Source: printed page 47.N22908-001- 1 TB, PCIe-4 × 4, TLC. Source: printed page 47.N24954-001- 1 TB, PCIe-4 × 4, TLC, self-encrypting drive (SED). Source: printed page 47.M16560-001- 1 TB, TLC. Source: printed page 47.M52033-001- 1 TB, TLC, self-encrypting drive (SED). Source: printed page 47.M17436-001- 512 GB, TLC. Source: printed page 47.M52031-001- 512 GB, self-encrypting drive (SED). Source: printed page 47.N24955-001- 512 GB. Source: printed page 47.N35225-001- 256 GB, self-encrypting drive (SED). Source: printed page 47.M11042-001- 256 GB. Source: printed page 47.N00354-001- Solid-state drive support kit. Source: printed page 47.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 39). (printed page 42).
- Take the bottom cover off (the Bottom cover section is on page 39). (printed page 42).
- Detach the battery lead from the main board (the Battery section is on page 49). (printed page 42).
- Undo the Phillips M2.0 × 2.5 fastener (1) that holds the drive to the machine. (printed page 47).
- Draw the drive out of the socket to take it away (2). (printed page 47).
- Power the machine down. If you cannot tell whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 39).
- Cut the power from the machine by unplugging the power cord from the machine. (printed page 39).
- Detach every external device from the machine. (printed page 39).
Part numbers in our catalog
- HP SSD N24954-001 (N24954-001)
- HP SSD M17436-001 (M17436-001)
- HP SSD M52031-001 (M52031-001)
- HP SSD M52027-001 (M52027-001)
- HP SSD N35225-001 (N35225-001)
- HP SSD M16560-001 (M16560-001)
- HP SSD N22908-001 (N22908-001)
- HP 256 GB PCIe value 2230 solid-state drive M11042-001 (M11042-001)
- HP Solid-state drive support kit N00354-001 (N00354-001)
- HP SSD M52033-001 (M52033-001)
- HP Solid-state drive, 512 GB, NMIC N24955-001 (N24955-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-645-g10-solid-state-drive-replacement-p47