Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 745 G3. Confirm the exact model on the service label before starting.
HP EliteBook 745 G3 Notebook PC fingerprint reader assembly replacement. HP prints this procedure on printed page 61 of its maintenance and service guide, and the spare-part table for this part is on printed page 61.
tools and parts
- Phillips P0 drivers
- Static-safe work surface
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 29. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Detach the fingerprint reader board cable off the system board (1). (printed page 61).
- Lift mylar cover, and remove it from the computer. (printed page 61).
- Slide bracket right, and then lift it off top cover (3). (printed page 61).
- Take out the fingerprint reader board and cable assembly off the top cover (4). (printed page 62).
- Put the fingerprint reader assembly back by repeating the printed removal moves in the opposite order (printed page 62).
Part numbers in our catalog
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-745-g3-fingerprint-reader-assembly-replacement