Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 745 G3. Confirm the exact model on the service label before starting.
HP EliteBook 745 G3 Notebook PC system board replacement. HP prints this procedure on printed page 71 of its maintenance and service guide.
tools and parts
- Phillips P0 drivers
- Static-safe work surface
- No spare part number for this component was found in the cached manual
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 29. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Detach the following cables from the system board: Speaker cable Display cable Webcam cable (select products only) (printed page 72).
- On a 14” computer, remove 2 Phillips PM2.5×5.0 screws that hold the system board to the computer. (printed page 73).
- Lift right side of system board up at an angle (2). (printed page 73).
- Pull system board up and toward the right to take out it from the computer (3). (printed page 73).
- Put the system board back by repeating the printed removal moves in the opposite order (printed page 73).
Part numbers in our catalog
- HP Smart card reader board with cable 821167-001 (821167-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-745-g3-system-board-replacement