Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 750 G1. Confirm the exact model on the service label before starting.
HP EliteBook 750 G1 Notebook PC power button board replacement. HP prints this procedure on printed page 92 of its maintenance and service guide, and the spare-part table for this part is on printed page 92.
tools and parts
- Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers
- Static-safe work surface
730959-001- Power button board for use in HP EliteBook 740/840/HP ZBook 14 models. Source: printed page 92.730822-001- Power button board for use in HP EliteBook 750/850 models. Source: printed page 92.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 53. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Detach the power button board cable off the power button board (1). (printed page 92).
- Take out the broadhead Phillips PM2.0×3.0 screw that holds the board to the top cover. (printed page 92).
- Slide power toward inside of top cover, and then lift it off top cover (3). (printed page 93).
- Put the power button board back by repeating the printed removal moves in the opposite order (printed page 93).
Parts this procedure uses
- HP Power button board with cable 730822-001 (730822-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-750-g1-power-button-board-replacement-p92