Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 750 G1. Confirm the exact model on the service label before starting.
HP EliteBook 750 G1 Notebook PC vga/usb board replacement. HP prints this procedure on printed page 87 of its maintenance and service guide, and the spare-part table for this part is on printed page 87.
tools and parts
- Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers
- Static-safe work surface
730966-001- VGA/USB board for use in HP EliteBook 740/840/HP ZBook 14 models. Source: printed page 87.730820-001- VGA/USB board for use in HP EliteBook 750/850 models. Source: printed page 87.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 53. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Detach the cable from the VGA/USB board (1). (printed page 87).
- Take out the two Phillips PM2.0×5.0 screws that hold the VGA/USB board to the top cover. (printed page 87).
- Take out the VGA/USB board from the top cover. (printed page 88).
- Put the vga/usb board back by repeating the printed removal moves in the opposite order (printed page 88).
Parts this procedure uses
- HP VGA/USB board, for 750/850 models 730820-001 (730820-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-750-g1-vga-usb-board-replacement-p87