Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 840 G11. Confirm the exact model on the service label before starting.
HP EliteBook 840 14 inch G11 Notebook PC speakers replacement. HP prints this procedure on printed page 45 of its maintenance and service guide, and the spare-part table for this part is on printed page 19.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N09034-001- Speakers. Source: printed page 45.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 39).
- Take the bottom cover off (the Bottom cover section is on page 37). (printed page 39).
- Detach the battery lead from the main board (the Battery section is on page 48). (printed page 39).
- Detach the speaker leads (1) from the main board. (printed page 45).
- Take the two Phillips M2.0 × 2.0 fasteners (2) that hold each speaker to the machine. (printed page 45).
- Lift the speakers up and out of the machine (3). (printed page 45).
Part numbers in our catalog
- HP speaker kit N09034-001 (N09034-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-840-14-inch-g11-speakers-replacement-p45