Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 840 G6. Confirm the exact model on the service label before starting.
HP EliteBook 840 G6 Notebook PC touchpad replacement. HP prints this procedure on printed page 59 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L62731-001- Touchpad for use in models without an NFC module. Source: printed page 59.L62732-001- Touchpad for use in models with an NFC module. Source: printed page 59.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down, unplug, and remove the bottom cover and the battery. (printed page 59).
- Unplug the NFC module, touchpad button board, and card reader leads from the touchpad. (printed page 59).
- Take out the five Phillips screws that secure the touchpad. (printed page 59).
- Lift the touchpad out of the chassis. (printed page 59).
Part numbers in our catalog
- HP touchpad L62731-001 (L62731-001)
- HP touchpad L62732-001 (L62732-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-840-g6-notebook-pc-touchpad-replacement-p59