HP Fortis G1m 11 inch Chromebook I/O board replacement

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP Fortis G1m 11 inch Chromebook. Confirm the exact model on the service label before starting.

HP Fortis G1m 11 inch Chromebook I/O board replacement. HP prints this procedure on printed page 26 of its maintenance and service guide, and the spare-part table for this part is on printed page 11.

Tools and parts

• Screwdrivers and a non-marking pry tool as HP lists for this procedure
• Static-safe work surface
• P24053-001 - I/O boards (left and right, includes cables). Source: printed page 38.
• P24054-001 - I/O support brackets (available in the Bracket Kit). Source: printed page 38.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 25). (printed page 34).
2. Take the bottom cover off (the Bottom cover section is on page 32). (printed page 26).
3. Take the battery out (the Removing and reinstalling the same battery section is on page 26). (printed page 34).

Parts this procedure uses

• HP Bracket kit holding touchpad, I/O, display and bezel bracket P24054-001 (P24054-001)

Part numbers in our catalog

• HP Left and right I/O boards, each supplied with its cable P24053-001 (P24053-001)

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-g1m-11-inch-chromebook-i-o-board-replacement-p26