Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Fortis G1m 11 inch Chromebook. Confirm the exact model on the service label before starting.
HP Fortis G1m 11 inch Chromebook I/O boards replacement. HP prints this procedure on printed page 38 of its maintenance and service guide, and the spare-part table for this part is on printed page 11.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P24053-001- I/O boards (left and right, includes cables). Source: printed page 38.P24054-001- I/O support brackets (available in the Bracket Kit). Source: printed page 38.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- To take the large I/O board: (printed page 38).
- To take the small I/O board: (printed page 39).
Parts this procedure uses
- HP Left and right I/O boards, each supplied with its cable P24053-001 (P24053-001)
- HP Bracket kit holding touchpad, I/O, display and bezel bracket P24054-001 (P24054-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-g1m-11-inch-chromebook-i-o-boards-replacement-p38