HP ProBook 430 G4 RTC battery replacement

Step-by-step HP ProBook 430 G4 RTC battery replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 31–70). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 430 G4. Confirm the exact model on the service label before starting.

HP ProBook 430 G4 Notebook PC RTC battery replacement. HP prints this procedure on printed page 70 of its maintenance and service guide.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Power the machine down. If you are unsure whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 31).
  2. Detach every external device wired to the machine. (printed page 63).
  3. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 63).

replacement

  1. Take the following parts out: a. Service door (the Service doors section is on page 31). b. Hard drive (the Hard drive section is on page 33) c. WLAN module (the WLAN/Bluetooth combo card section is on page 37) d. WWAN module (the WWAN module section is on page 39) e. Keyboard (the Keyboard section is on page 42) f. Top cover (the Top cover section is on page 49) g. Battery (the Battery section is on page 61) h. Main board (the main board section is on page 67) (printed page 70).
  2. Place the main board upside-down. (printed page 70).
  3. Employ a tool to lever the battery out of the socket (1). (printed page 70).
  4. Take the battery out from the main board (2). (printed page 70).
  5. Fit the replacement part by working back through the printed removal steps (printed page 70).

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-430-g4-rtc-battery-replacement-p70

Key facts

HP document part number
903111-001
Model
HP ProBook 430 G4
Release year
2016
Screen size
13.3"
Printed pages
31–70

Related