Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 440 G4. Confirm the exact model on the service label before starting.
HP ProBook 440 G4 display bezel, webcam/microphone module, and raw display panel replacement. HP prints this procedure on printed page 47 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
906973-001- Display panel assembly, touch screen. Source: printed page 75.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Place the machine upright with the front toward you, and after that open it. (printed page 47).
- Flex the inside of the top edge (1) (printed page 47).
- Take out the display bezel (4). (printed page 47).
- To remove the webcam/microphone module: (printed page 47).
- To remove the display panel: (printed page 48).
- Fit the replacement part by working back through the printed removal steps (printed page 49).
Part numbers in our catalog
- HP 14-inch touch display panel assembly 906973-001 (906973-001)
- HP 14-inch FHD display panel (raw) (809002-002)
- HP 14-inch HD display panel (raw) (839668-002)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-g4-display-bezel-webcam-microphone-module-and-raw-display-panel-replace-p47