HP ProBook 440 G4 hard drive replacement

Step-by-step HP ProBook 440 G4 hard drive replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you need905708-001HP Hard drive cover; Hard drive service door 905708-001 for the HP ProBook 440 G4
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 32–36). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 440 G4. Confirm the exact model on the service label before starting.

HP ProBook 440 G4 Notebook PC hard drive replacement. HP prints this procedure on printed page 34 of its maintenance and service guide.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • 832077-001 - 1 TB, 5400 rpm, 7 mm. Source: printed page 34.
  • 778186-001 - 500 GB, 5400 rpm, 7 mm. Source: printed page 34.
  • 732000-001 - 500 GB, 5400 rpm, 7 mm, hybrid (8-GB SSD). Source: printed page 34.
  • 778189-001 - 500 GB, 7200 rpm, 7 mm. Source: printed page 34.
  • 905708-001 - Hard drive cover. Source: printed page 34.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Power the machine down. (printed page 32).
  2. Place the computer in “cell Safe mode” (Battery Safe mode on page 31). (printed page 32).
  3. Detach all external devices connected to the computer. (printed page 32).
  4. Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 32).

replacement

  1. Take out the 2 Phillips PM2.0×3.0 screws that hold the hard drive to the computer. (printed page 34).
  2. Pull the plastic tab for sliding the hard drive away from the bottom of the machine to disengage it from the connector. (printed page 34).
  3. Lift the hard drive from the bay (4). (printed page 35).
  4. To take off the hard drive cover from the hard drive, take out the 4 Phillips PM3.0×3.0 screws that (printed page 35).
  5. Navigate to www.hp.com. (printed page 36).
  6. Click Support & Drivers > click Drivers & Software. (printed page 36).
  7. In the Enter a product name/number box (printed page 36).
  8. Click the link for the computer model. (printed page 36).
  9. Select the operating system, and then click Next. (printed page 36).
  10. Under Step 2: Select a Download (printed page 36).
  11. Click the link for the most recent BIOS. (printed page 36).
  12. Click the Download button (printed page 36).
  13. Take out the main service door (see that procedure on page 32). (printed page 36).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-g4-hard-drive-replacement-p34

Key facts

HP document part number
903114-001
Model
HP ProBook 440 G4
Release year
2016
Screen size
14"
Printed pages
32–36

Related