Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 445 G9. Confirm the exact model on the service label before starting.
HP ProBook 445 14 inch G9 Notebook PC display panel replacement. HP prints this procedure on printed page 59 of its maintenance and service guide, and the spare-part table for this part is on printed page 59.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 38). (printed page 41).
- Take the bottom cover off (the Bottom cover section is on page 38). (printed page 41).
- Detach the battery lead from the main board (the Battery section is on page 48). (printed page 41).
replacement
- Take the power connector lead (the Power connector lead section is on page 58). (printed page 59).
Part numbers in our catalog
- HP FHD privacy display panel (N00079-001)
- HP 14-inch display panel (FHD 400 nit) (N00081-001)
- HP 14-inch FHD display panel N00082-001 (N00082-001)
- HP FHD 250 nit touch display panel (N00080-001)
- HP 14-inch HD display panel N00083-001 (N00083-001)
- HP Ambient light sensor, not illustrated N00883-001 (N00883-001)
- HP Display panel tape sold as its own spare N00350-001 (N00350-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-445-14-inch-g9-display-panel-replacement-p59