HP ProBook 445 G9 system board replacement

Step-by-step HP ProBook 445 G9 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN01923-xx1HP System board with AMD Ryzen 3 5425U processor N01923-xx1 for the HP ProBook 445 G9
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 56–57). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 445 G9. Confirm the exact model on the service label before starting.

HP ProBook 445 14 inch G9 Notebook PC system board replacement. HP prints this procedure on printed page 56 of its maintenance and service guide.

tools and parts

  • Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers
  • Static-safe work surface
  • No spare part number for this component was found in the cached manual

preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 30. Its preparation for disassembly is on printed page 38: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

replacement

  1. Detach the following cables from the system board: (printed page 56).
  2. Take out port bracket (1), by removing three Phillips M2.5 × 4.0 screws that hold bracket to system board, and then removing the bracket (3). (printed page 57).
  3. Take out the two Phillips M2.0 × 2.5 screws that hold the system board to the computer. (printed page 57).
  4. Lift side of system board upward (5), and then pull system board away from connectors on the side of the computer to take out it (6). (printed page 57).
  5. Put the system board back by repeating the printed removal moves in the opposite order (printed page 57).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-445-14-inch-g9-system-board-replacement-p56

Key facts

HP document part number
N03553-001
Model
HP ProBook 445 G9
Release year
2022
Screen size
14"
Printed pages
56–57

Related