Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 455 G4. Confirm the exact model on the service label before starting.
HP ProBook 455 G4 Notebook PC M.2 solid-state drive replacement. HP prints this procedure on printed page 44 of its maintenance and service guide.
tools and parts
- Flat-bladed drivers, Phillips P0 and P1 drivers and Torx T8 drivers
- Static-safe work surface
- No spare part number for this component was found in the cached manual
907722-001- 256-GB. Source: printed page 44.907723-001- 128-GB. Source: printed page 44.907360-001- 128-GB. Source: printed page 44.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 27. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Take out the Phillips PM2.0×4.0 screw that holds the solid-state drive to the computer. (printed page 44).
- Take out the solid-state drive by pulling the module away off the slot at an angle. (printed page 44).
- Put the solid-state drive back by repeating the printed removal moves in the opposite order (printed page 44).
Part numbers in our catalog
- HP SSD 907360-001 (907360-001)
- HP M.2 solid-state drive, 256 GB, with bracket (ProBook 450 G4) 907722-001 (907722-001)
- HP M.2 solid-state drive, 128 GB, with bracket (ProBook 450 G4) 907723-001 (907723-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-455-g4-m-2-solid-state-drive-replacement