Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15 G3. Confirm the exact model on the service label before starting.
HP ZBook 15 G3 Mobile Workstation graphics board replacement. HP prints this procedure on printed page 66 of its maintenance and service guide, and the spare-part table for this part is on printed page 66.
tools and parts
- Torx T8 screw driver, Flat-bladed screw driver and Magnetic screw driver
- Static-safe work surface
848261-001- NVIDIA Quadro M1000M graphics board. Source: printed page 66.848262-001- NVIDIA Quadro M2000M graphics board. Source: printed page 66.910536-001- NVIDIA Quadro M600M graphics board. Source: printed page 66.848263-001- AMD FirePro W5170M graphics board. Source: printed page 66.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 27. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Take out the two Torx T8M3.0×5.5 screws that hold the graphics board to the system board. (printed page 66).
- Raise the edge of the graphics board until it sits at an angle (2), then take the board out of the socket (3). (printed page 66).
- Put the graphics board back by repeating the printed removal moves in the opposite order (printed page 66).
Parts this procedure uses
- HP NVIDIA Quadro M1000M graphics board 848261-001 (848261-001)
- HP NVIDIA Quadro M2000M graphics board 848262-001 (848262-001)
- HP NVIDIA Quadro M600M graphics board 910536-001 (910536-001)
- HP AMD FirePro W5170M graphics board 848263-001 (848263-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15-g3-graphics-board-replacement-p66