Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook Firefly 14 G9. Confirm the exact model on the service label before starting.
HP ZBook Firefly 14 G9 bottom cover replacement. HP prints this procedure on printed page 44 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08131-001- Bottom cover for use in models with UMA graphics memory. Source: printed page 44.N08133-001- Bottom cover for use in models with discrete graphics memory. Source: printed page 44.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut the machine down, unplug the mains lead and disconnect every peripheral. (printed page 44).
- Undo the captive screws that hold the base cover in place. (printed page 44).
- Work a non-marring tool around the rim to release the cover, then lift it away. (printed page 44).
Part numbers in our catalog
- HP bottom cover (UMA graphics) (N09225-001)
- HP bottom cover (discrete graphics, WLAN) (N09226-001)
- HP bottom cover N08133-001 (N08133-001)
- HP bottom cover L15814-001 (L15814-001)
- HP bottom cover N08131-001 (N08131-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-firefly-14-g9-bottom-cover-replacement-p44