Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook Firefly 14 G9. Confirm the exact model on the service label before starting.
HP ZBook Firefly 14 G9 card reader board replacement. HP prints this procedure on printed page 55 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N02323-001- Card reader board. Source: printed page 55.N09040-001- Card reader board cable (included in Cable Kit). Source: printed page 55.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and remove the bottom cover. (printed page 55).
- Take the battery out so the board is dead. (printed page 55).
- Release the card reader cable from its socket, undo the bracket screw and lift the reader out. (printed page 55).
Parts this procedure uses
- HP Cable Kit N09040-001 (N09040-001)
Part numbers in our catalog
- HP card reader N02323-001 (N02323-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-firefly-14-g9-card-reader-board-replacement-p55