Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 40). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.
Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook 14 G7. Confirm the exact model on the service label before starting.
HP Chromebook® 14 G7 sensor board cable replacement. HP prints this procedure on printed page 40 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Remove the top cover/keyboard and unplug the battery cable from the system board. (printed page 40).
- Open the latches on both connectors that carry the sensor board cable. (printed page 40).
- Pull the cable free of the sensor board and of the connector board. (printed page 40).
- Take the sensor board cable out of the computer. (printed page 40).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-14-g7-sensor-board-cable-replacement-p40