Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 53). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.
Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x2 G8 Tablet. Confirm the exact model on the service label before starting.
HP Elite x2 G8 Tablet camera module replacement. HP prints this procedure on printed page 53 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L67412-001- IR camera (2 MP). Source: printed page 54.M75415-001- HD camera (8 MP). Source: printed page 54.L67421-001- Microphone cable. Source: printed page 54.M75416-001- IR LED cable. Source: printed page 54.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down the computer and unplug the power cord. (printed page 53).
- Release the camera module screw or clips and free its connector. (printed page 53).
- Slide the camera module out of its slot and set it aside. (printed page 53).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x2-g8-tablet-camera-module-replacement-p53