Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 61). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.
Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x2 G8 Tablet. Confirm the exact model on the service label before starting.
HP Elite x2 G8 Tablet volume board replacement. HP prints this procedure on printed page 61 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L67419-001- Volume board and cable (includes the power connector cable). Source: printed page 61.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down the computer and unplug the power cord. (printed page 61).
- Disconnect the volume board cables and take out its screws. (printed page 61).
- Lift the volume board straight up and set it aside. (printed page 61).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x2-g8-tablet-volume-board-replacement-p61