Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 40). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.
Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x2 G8 Tablet. Confirm the exact model on the service label before starting.
HP Elite x2 G8 Tablet kickstand replacement. HP prints this procedure on printed page 40 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L67409-001- Kickstand spare part. Source: printed page 40.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down the computer and unplug the power cord. (printed page 40).
- Follow the printed steps for the kickstand and note the screw order. (printed page 40).
- Remove the kickstand and store it in a marked parts tray. (printed page 40).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x2-g8-tablet-kickstand-replacement-p40