Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 645 G11. Confirm the exact model on the service label before starting.
HP EliteBook 645 G11 fingerprint reader board replacement. HP prints this procedure on printed page 77 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N96242-001- Fingerprint reader board. Source: printed page 77.N98721-001- Fingerprint reader board cable (included in the Cable Kit). Source: printed page 77.N96234-001- Fingerprint reader insert (included in the Plastics Kit). Source: printed page 77.N96233-001- Fingerprint reader bracket. Source: printed page 77.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down the computer and unplug the power cord. (printed page 77).
- Disconnect the fingerprint reader board cables and take out its screws. (printed page 77).
- Lift the fingerprint reader board straight up and set it aside. (printed page 77).
Parts this procedure uses
- HP touchpad cable; I/O board cables N98721-001 (N98721-001)
- HP Plastics and rubber kit N96234-001 (N96234-001)
Part numbers in our catalog
- HP fingerprint reader (N96242-001)
- HP Fingerprint reader bracket N96233-001 (N96233-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-645-g11-fingerprint-reader-board-replacement-p77