Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 645 G11. Confirm the exact model on the service label before starting.
HP EliteBook 645 G11 smart card reader replacement. HP prints this procedure on printed page 81 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N96232-001- Smart card reader. Source: printed page 81.N98721-001- Smart card reader cable (included in Cable Kit). Source: printed page 81.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down the computer and unplug the power cord. (printed page 81).
- Disconnect the smart card reader cables and take out its screws. (printed page 81).
- Lift the smart card reader straight up and set it aside. (printed page 81).
Parts this procedure uses
- HP touchpad cable; I/O board cables N98721-001 (N98721-001)
Part numbers in our catalog
- HP smart card reader (N96232-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-645-g11-smart-card-reader-replacement-p81