Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 80). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.
Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 645 G11. Confirm the exact model on the service label before starting.
HP EliteBook 645 G11 nfc module replacement. HP prints this procedure on printed page 80 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
914758-001- NFC module. Source: printed page 80.N98721-001- NFC module cable (included in Cable Kit). Source: printed page 80.N96725-001- NFC antenna. Source: printed page 80.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down the computer and unplug the power cord. (printed page 80).
- Release the nfc module screw or clips and free its connector. (printed page 80).
- Slide the nfc module out of its slot and set it aside. (printed page 80).
Parts this procedure uses
- HP NFC module 914758-001 (914758-001)
- HP touchpad cable; I/O board cables N98721-001 (N98721-001)
- HP NFC module antenna N96725-001 (N96725-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-645-g11-nfc-module-replacement-p80