HP EliteBook 835 G8 Memory modules replacement

Step-by-step HP EliteBook 835 G8 Memory modules replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM08556-001HP Solid-state drive cover and memory cover, both supplied in t M08556-001 for the HP EliteBook 835 G8
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 33). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 835 G8. Confirm the exact model on the service label before starting.

HP EliteBook 835 G8 Notebook PC memory modules replacement. HP prints this procedure on printed page 33 of its maintenance and service guide, and the spare-part table for this part is on printed page 33.

tools and parts

  • Tweezers
  • Nonconductive, nonmarking pry tool
  • Magnetic Phillips P1 screwdriver
  • M09713-001 - 32 GB, DDR4-3200. Source: printed page 33.
  • L67710-001 - 16 GB, DDR4-3200. Source: printed page 33.
  • L46598-001 - 8 GB, DDR4-3200. Source: printed page 33.
  • L83673-001 - 4 GB, DDR4-3200. Source: printed page 33.
  • M08556-001 - Memory module cover (included in Bracket Kit). Source: printed page 33.

preparation

Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Get the machine ready for teardown (that section sits on page 32).
  2. Take the bottom cover off (that section sits on page 32).
  3. Unplug the battery lead from the main board (the Battery section sits on page 42).

replacement

  1. Lift the memory module cover away using the tab (1); the modules sit under it (2).
  2. Spread the two retention clips outward (1) so the module tips up at a 45° angle, and pull the module (2) out.

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-835-g8-memory-modules-replacement

Key facts

HP document part number
M17148-001
Model
HP EliteBook 835 G8
Release year
2021
Screen size
13.3"
Printed pages
33

Related