Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 835 G8. Confirm the exact model on the service label before starting.
HP EliteBook 835 G8 Notebook PC solid-state drive replacement. HP prints this procedure on printed page 39 of its maintenance and service guide, and the spare-part table for this part is on printed page 39.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L85348-002- 1 TB, PCIe, TLC. Source: printed page 39.L85360-002- 512 GB, PCIe, TLC. Source: printed page 39.L85368-002- 512 GB, PCIe, TLC, self-encrypting drive (SED). Source: printed page 39.L85364-002- 512 GB, PCIe, value. Source: printed page 39.L85350-002- 256 GB, PCIe, TLC. Source: printed page 39.M07245-002- 256 GB, PCIe, TLC, self-encrypting drive (SED). Source: printed page 39.L85354-002- 256 GB, PCIe, value. Source: printed page 39.M06792-001- 128 GB, PCIe, TLC. Source: printed page 39.M08556-001- Solid-state drive cover (included in Bracket Kit). Source: printed page 39.
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 32). (printed page 34).
- Take the bottom cover off (the Bottom cover section is on page 32). (printed page 34).
- Detach the battery lead from the main board (the Battery section is on page 42). (printed page 34).
replacement
- Undo the Phillips M2.0 × 2.5 fastener (1) that holds the drive to the machine. (printed page 40).
- Draw the drive out of the socket to take it away (2). (printed page 40).
- Refit the cover by slipping the edges of the cover into the clips at the main board near the sides of the solid-state drive. (printed page 41).
- Power the machine down. If you cannot tell whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 42).
- Cut the power from the machine by unplugging the power cord from the machine. (printed page 42).
- Detach every external device from the machine. (printed page 42).
Part numbers in our catalog
- HP SSD L85360-002 (L85360-002)
- HP SSD L85348-001 (L85348-001)
- HP SSD L85354-001 (L85354-001)
- HP SSD L85350-002 (L85350-002)
- HP SSD L85364-002 (L85364-002)
- HP SSD L85348-002 (L85348-002)
- HP SSD L85360-001 (L85360-001)
- HP SSD L85364-001 (L85364-001)
- HP SSD M06792-001 (M06792-001)
- HP SSD L85368-002 (L85368-002)
- HP SSD M07245-001 (M07245-001)
- HP SSD L85354-002 (L85354-002)
- HP SSD L85350-001 (L85350-001)
- HP Solid-state drive, 512 GB PCIe TLC self-encrypting L85368-001 (L85368-001)
- HP Solid-state drive cover and memory cover, both supplied in t M08556-001 (M08556-001)
- HP Solid-state drive 256 GB, PCIe, TLC, self-encrypting drive ( M07245-002 (M07245-002)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-835-g8-solid-state-drive-replacement-p39