Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 835 G8. Confirm the exact model on the service label before starting.
HP EliteBook 835 G8 Notebook PC speakers replacement. HP prints this procedure on printed page 45 of its maintenance and service guide, and the spare-part table for this part is on printed page 20.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M08523-001- Speaker Kit. Source: printed page 45.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 32). (printed page 34).
- Take the bottom cover off (the Bottom cover section is on page 32). (printed page 34).
- Detach the battery lead from the main board (the Battery section is on page 42). (printed page 34).
- Detach the speaker lead from the main board (1). (printed page 45).
- Take the lead between the speakers out of the clips along the lower of the battery (2). (printed page 45).
- Take the two Phillips M2.0 × 4.0 fasteners (3) that hold each speaker to the machine. (printed page 45).
- Take the speakers from the machine (4). (printed page 46).
- Fit the replacement part by working back through the printed removal steps (printed page 46).
Part numbers in our catalog
- HP speaker kit M08523-001 (M08523-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-835-g8-speakers-replacement-p45