Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 845 G10. Confirm the exact model on the service label before starting.
HP EliteBook 845 14 inch G10 Notebook PC heat sink replacement. HP prints this procedure on printed page 83 of its maintenance and service guide.
tools and parts
- Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers
- Static-safe work surface
- No spare part number for this component was found in the cached manual
N13073-001- For use with system boards equipped with a 28 W processor. Source: printed page 83.N13072-001- For use with system boards equipped with a 15 W processor. Source: printed page 83.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 33. Its preparation for disassembly is on printed page 44: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- In order indicated on heat sink, loosen the four Phillips captive screws hold the heat sink to the system board. (printed page 83).
- Take out the heat sink from the system board. (printed page 84).
- Thoroughly clean thermal material from surfaces of the heat sink (printed page 84).
Part numbers in our catalog
- HP heat sink, 28 W processor models (N13073-001)
- HP heat sink N13072-001 (N13072-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-845-14-inch-g10-heat-sink-replacement-p83