HP EliteBook 845 G10 WLAN module replacement

Step-by-step HP EliteBook 845 G10 WLAN module replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM22541-005HP Motherboard M22541-005 for the HP EliteBook 845 G10
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46–54). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 845 G10. Confirm the exact model on the service label before starting.

HP EliteBook 845 14 inch G10 Notebook PC WLAN module replacement. HP prints this procedure on printed page 53 of its maintenance and service guide, and the spare-part table for this part is on printed page 23.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • M22541-005 - MediaTek RZ616 Wi-Fi 6E + Bluetooth 5.3 M.2 2230 AIM-T 160 MHz PCI-e + USB worldwide (WW) WLAN module. Source: printed page 53.
  • N19618-005 - Realtek 8852CE Wi-Fi 6E + Bluetooth 5.3 M.2 2230 PCI-e + USB WW WLAN module. Source: printed page 53.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 44). (printed page 46).
  2. Take the bottom cover off (the Bottom cover section is on page 44). (printed page 47).
  3. Detach the battery lead from the main board (the Battery section is on page 46). (printed page 48).
  4. Gently detach the WLAN aerial leads (1) from the WLAN module. (printed page 53).
  5. Take the Phillips M2.0 × 2.5 fastener (2) that holds the WLAN module to the main board. (printed page 53).
  6. Take the WLAN unit (3) by drawing it away from the socket at an angle. (printed page 53).
  7. When the WLAN aerial is not on the terminal of the WLAN module, fit a protective sleeve on the aerial connector, as shown in the following illustration. (printed page 54).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-845-14-inch-g10-wlan-module-replacement-p53

Key facts

HP document part number
N55627-001
Model
HP EliteBook 845 G10
Release year
2023
Screen size
14"
Printed pages
46–54