HP EliteBook 845 G10 memory modules replacement

Step-by-step HP EliteBook 845 G10 memory modules replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN18250-001HP Shield used with the solid-state drive and with the memory m N18250-001 for the HP EliteBook 845 G10
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46–51). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 845 G10. Confirm the exact model on the service label before starting.

HP EliteBook 845 14 inch G10 Notebook PC memory modules replacement. HP prints this procedure on printed page 50 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • N50075-001 - 32 GB (SODIMM, DDR5-4800, 1.1v, NECC). Source: printed page 49.
  • N38627-001 - 16 GB (SODIMM, DDR5-4800, 1.1v, NECC). Source: printed page 49.
  • N37792-001 - 8 GB (SODIMM, DDR5-4800, 1.1v, NECC). Source: printed page 49.
  • N18250-001 - Memory module shield: The memory module shield is available using spare part number. Source: printed page 50.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 44). (printed page 46).
  2. Take the bottom cover off (the Bottom cover section is on page 44). (printed page 47).
  3. Detach the battery lead from the main board (the Battery section is on page 46). (printed page 48).
  4. Free the grounding tape (1) that holds the memory unit shield to the heat sink as well as the solid-state drive shield. (printed page 50).
  5. Employ the tabs (2) at the memory module shield to lift and take the shield (3) from the machine. (printed page 50).
  6. Push the two clips apart (1) until the memory module stands at a 45° angle, and after that take the unit (2). Use the same operation to take all memory modules. (printed page 51).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-845-14-inch-g10-memory-modules-replacement-p50

Key facts

HP document part number
N55627-001
Model
HP EliteBook 845 G10
Release year
2023
Screen size
14"
Printed pages
46–51

Related