HP Fortis Flip G1i 11 inch Chromebook pen charger replacement

Step-by-step HP Fortis Flip G1i 11 inch Chromebook pen charger replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN85027-001HP Cable kit that carries the touchpad cable N85027-001 for the HP Fortis Flip G1i 11 inch Chromebook
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Parts this procedure uses
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46–47). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP Fortis Flip G1i 11 inch Chromebook. Confirm the exact model on the service label before starting.

HP Fortis Flip G1i 11 inch Chromebook pen charger replacement. HP prints this procedure on printed page 46 of its maintenance and service guide, and the spare-part table for this part is on printed page 46.

tools and parts

  • Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers
  • Static-safe work surface
  • N85027-001 - Pen charger (in the Cable Kit). Source: printed page 46.

preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 19. Its preparation for disassembly is on printed page 28: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

replacement

  1. Peel tape off pen charger system board connector. The tape may stay on the system board. (printed page 46).
  2. Detach the cable from the system board ZIF connector. (printed page 46).
  3. Take out the three Phillips M1.6 × 4.0 screws from the charger. (printed page 46).
  4. Take out the charger from the computer. (printed page 47).

Parts this procedure uses

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-flip-g1i-11-inch-chromebook-pen-charger-replacement-p46

Key facts

HP document part number
P27549-001
Model
HP Fortis Flip G1i 11 inch Chromebook
Release year
2025
Screen size
11.6"
Printed pages
46–47

Related