HP Fortis Flip G1i 11 inch Chromebook touchpad replacement

Step-by-step HP Fortis Flip G1i 11 inch Chromebook touchpad replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN85027-001HP Cable kit that carries the touchpad cable N85027-001 for the HP Fortis Flip G1i 11 inch Chromebook
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 29–41). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP Fortis Flip G1i 11 inch Chromebook. Confirm the exact model on the service label before starting.

HP Fortis Flip G1i 11 inch Chromebook touchpad replacement. HP prints this procedure on printed page 39 of its maintenance and service guide, and the spare-part table for this part is on printed page 39.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • N85025-001 - Touchpad, jet black. Source: printed page 39.
  • N85026-001 - Touchpad, galactic blue. Source: printed page 39.
  • N85027-001 - Touchpad cable (available in the Cable Kit). Source: printed page 39.
  • N85029-001 - Touchpad bracket (available in the Bracket Kit). Source: printed page 39.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 28). (printed page 29).
  2. Take the bottom cover off (the Bottom cover section is on page 37). (printed page 29).

replacement

  1. Take the battery out (the Battery section is on page 28). (printed page 39).
  2. Take the four Phillips M2.0 × 2.5 fasteners (1) from the touchpad bracket, and after that take the bracket (2). (printed page 40).
  3. Take the tape (1) from the touchpad. (printed page 40).
  4. Detach the lead from the ZIF connector (2) on the touchpad. (printed page 40).
  5. Lift the protective tape (3) that covers the fasteners at the top of the touchpad. (printed page 40).
  6. Take gray conductive tape (4) from touchpad. (printed page 40).
  7. Take the three Phillips M2.0 × 2.5 fasteners (5) from the touchpad. (printed page 40).
  8. Take the touchpad (6) from the machine. (printed page 40).
  9. When installing the touchpad as well as bracket, be sure which the rubber bumper is installed at the lower of the touchpad bracket inside the location shown in the following illustration. (printed page 41).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-flip-g1i-11-inch-chromebook-touchpad-replacement-p39

Key facts

HP document part number
P27549-001
Model
HP Fortis Flip G1i 11 inch Chromebook
Release year
2025
Screen size
11.6"
Printed pages
29–41

Related