Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 430 G3. Confirm the exact model on the service label before starting.
HP ProBook 430 G3 Notebook PC fan replacement. HP prints this procedure on printed page 61 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
826379-001- Fan. Source: printed page 61.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the fan cable from the system board. (printed page 61).
- Take out the two Phillips PM2.5×5.0 screws that hold the fan to the computer. (printed page 61).
- Lift the fan from the computer (3). (printed page 62).
- Fit the replacement part by working back through the printed removal steps (printed page 62).
Part numbers in our catalog
- HP cooling fan 826379-001 (826379-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-430-g3-fan-replacement-p61