Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 430 G3. Confirm the exact model on the service label before starting.
HP ProBook 430 G3 Notebook PC function board replacement. HP prints this procedure on printed page 57 of its maintenance and service guide.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
826381-001- Function board. Source: printed page 57.826373-001- Function board cable (included in Cable Kit). Source: printed page 57.
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Position the top cover upside-down. (printed page 53).
replacement
- Take out the Phillips PM2.0×3.0 screw that holds the function board to the top cover. (printed page 57).
- Lift the disengage the cable from the adhesive (printed page 57).
- Lift the board off the top cover (3). (printed page 58).
- Take out the function board from the top cover. (printed page 58).
- Fit the replacement part by working back through the printed removal steps (printed page 58).
Parts this procedure uses
- HP Function board 826381-001 (826381-001)
- HP Battery connector cable 826373-001 (826373-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-430-g3-function-board-replacement-p57