Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 430 G8. Confirm the exact model on the service label before starting.
HP ProBook 430 G8 Notebook PC memory modules replacement. HP prints this procedure on printed page 31 of its maintenance and service guide, and the spare-part table for this part is on printed page 31.
tools and parts
- Tweezers
- Nonconductive, nonmarking pry tool
- Magnetic Phillips P1 screwdriver
L67710-002- 16 GB, DDR4-3200. Source: printed page 31.L46598-002- 8 GB, DDR4-3200. Source: printed page 31.L83673-002- 4 GB, DDR4-3200. Source: printed page 31.
preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Get the machine ready for teardown (that section sits on page 28).
- Take the bottom cover off (that section sits on page 28).
- Unplug the battery lead from the main board (the Battery section sits on page 29).
replacement
- Spread the two retention clips outward (1) so the module tips up at a 45° angle, and pull the module (2) out.
Part numbers in our catalog
- HP 16 GB DDR4-3200 memory module L67710-002 (L67710-002)
- HP Memory L46598-002 (L46598-002)
- HP Memory module, DDR4-3200, 4 GB L83673-002 (L83673-002)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-430-g8-memory-modules-replacement