HP ProBook 430 G8 WLAN module replacement

Step-by-step HP ProBook 430 G8 WLAN module replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needL44796-002HP wireless card L44796-002 for the HP ProBook 430 G8
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 30–34). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 430 G8. Confirm the exact model on the service label before starting.

HP ProBook 430 G8 Notebook PC WLAN module replacement. HP prints this procedure on printed page 32 of its maintenance and service guide.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • L92724-002 - Intel Wi-Fi 6 AX201 + Bluetooth 5 (non-vPro). Source: printed page 33.
  • L22634-002 - Intel Wireless-AC 9560 802.11ac 2 × 2 Wi-Fi + Bluetooth 5 (MU-MIMO supported). Source: printed page 33.
  • L44796-002 - Realtek RTL8822BE 802.11ac/abgn 2 × 2 + Bluetooth 5 (MU-MIMO supported) authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support.. Source: printed page 33.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 28). (printed page 30).
  2. Take the bottom cover off (the Bottom cover section is on page 28). (printed page 30).
  3. Detach the battery lead from the main board (the Battery section is on page 29). (printed page 31).

replacement

  1. Gently detach the two aerial leads from the unit (1). (printed page 33).
  2. Undo the Phillips M2.0 × 2.5 fastener (2), and after that take the WLAN module out (3). (printed page 33).
  3. When the WLAN aerial is not on the terminal of the WLAN module, fit a protective sleeve on the aerial connector, as shown in the following illustration. (printed page 34).
  4. Fit the replacement part by working back through the printed removal steps (printed page 34).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-430-g8-wlan-module-replacement-p32

Key facts

HP document part number
M11677-001
Model
HP ProBook 430 G8
Release year
2020
Screen size
13.3"
Printed pages
30–34