Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 450 G10. Confirm the exact model on the service label before starting.
HP ProBook 450 G10 m.2 solid-state drive replacement. HP prints this procedure on printed page 43 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M16560-001- Solid-state drive 1 TB, PCIe, TLC, PCIe-4×4, 2280. Source: printed page 44.M11042-001- Solid-state drive 256 GB, PCIe, 2230. Source: printed page 44.N00354-001- Solid-state drive support kit. Source: printed page 44.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and open the bottom cover so the storage device is reachable. (printed page 43).
- Disconnect the storage cable from the system board and undo the fastener that holds the drive in place. (printed page 43).
- Slide the drive out of its connector and keep the storage cable with the system board. (printed page 43).
Part numbers in our catalog
- HP SSD M16560-001 (M16560-001)
- HP SSD N45476-001 (N45476-001)
- HP SSD L85360-001 (L85360-001)
- HP SSD M11040-001 (M11040-001)
- HP SSD L85354-001 (L85354-001)
- HP 256 GB PCIe value 2230 solid-state drive M11042-001 (M11042-001)
- HP Solid-state drive support kit N00354-001 (N00354-001)
- HP 512 GB, PCIe, 2280, lock N50233-001 (N50233-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-450-g10-m-2-solid-state-drive-replacement-p43