Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 450 G10. Confirm the exact model on the service label before starting.
HP ProBook 450 G10 wlan module replacement. HP prints this procedure on printed page 40 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M53366-001- WLAN module Intel AX211 Wi-Fi 6E Bluetooth 5.3 WLAN. Source: printed page 40.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and open the bottom cover so the wireless module is reachable. (printed page 40).
- Disconnect the antenna leads from the module one at a time and note which lead goes where. (printed page 40).
- Undo the retaining fastener, lift the module free of the connector, and keep it away from the antenna leads. (printed page 40).
Part numbers in our catalog
- HP wireless card N19618-001 (N19618-001)
- HP wireless card M53366-001 (M53366-001)
- HP wireless card N00182-001 (N00182-001)
- HP WLAN module protective tape N02047-001 (N02047-001)
- HP Bluetooth travel mouse L62043-001 (L62043-001)
- HP HP 435 wireless mouse M62277-001 (M62277-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-450-g10-wlan-module-replacement-p40