Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 450 G10. Confirm the exact model on the service label before starting.
HP ProBook 450 G10 power connector cable replacement. HP prints this procedure on printed page 58 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M21725-001- Power connector cable. Source: printed page 58.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and open the bottom cover so the cable route is reachable. (printed page 58).
- Disconnect the cable connector from the system board and release the cable from its clips and guides. (printed page 58).
- Route the cable out of the chassis and keep it attached to the part it serves if it is a kit item. (printed page 58).
Part numbers in our catalog
- HP DC-in connector M21725-001 (M21725-001)
- HP cable N03218-001 (N03218-001)
- HP cable N01915-001 (N01915-001)
- HP Fingerprint reader bracket (Bracket Kit) N01916-001 (N01916-001)
- HP Nano combination cable lock N10500-001 (N10500-001)
- HP Essential nano combination cable lock N10501-001 (N10501-001)
- HP Sure Key cable lock L65088-001 (L65088-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-450-g10-power-connector-cable-replacement-p58