Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.
Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 640 G2. Confirm the exact model on the service label before starting.
HP ProBook 640 G2 Notebook PC optical drive replacement. HP prints this procedure on printed page 46 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
840743-001- Optical drive/DVD ROM combo for 15" products. Source: printed page 46.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Shut down and unplug the computer, then remove the service door. (printed page 46).
- Press the eject or release control to unlock the drive. (printed page 46).
- Slide the drive out of its bay and disconnect it if it stays linked. (printed page 46).
Parts this procedure uses
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-640-g2-notebook-pc-optical-drive-replacement-p46