Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 650 G2. Confirm the exact model on the service label before starting.
HP ProBook 650 G2 Notebook PC fingerprint reader replacement. HP prints this procedure on printed page 73 of its maintenance and service guide.
tools and parts
- Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers
- Static-safe work surface
- No spare part number for this component was found in the cached manual
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 32. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Take out the Phillips screwfrom the fingerprint reader bracket(1). (printed page 73).
- Take out the bracket(2). (printed page 73).
- Take off the cable, and then remove the fingerprint reader (4). (printed page 74).
- Put the fingerprint reader back by repeating the printed removal moves in the opposite order (printed page 74).
Part numbers in our catalog
- HP Fingerprint reader board with cable, 15 inch 840735-001 (840735-001)
- HP Bracket kit with fingerprint, WLAN module and smart card rea 840683-001 (840683-001)
- HP Fingerprint reader board with cable, 14 inch 840664-001 (840664-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-650-g2-fingerprint-reader-replacement-p73