HP ProBook 650 G2 display assembly components replacement

Step-by-step HP ProBook 650 G2 display assembly components replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 83–86). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ProBook 650 G2. Confirm the exact model on the service label before starting.

HP ProBook 650 G2 Notebook PC display assembly components replacement. HP prints this procedure on printed page 83 of its maintenance and service guide.

tools and parts

  • Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers
  • Static-safe work surface
  • No spare part number for this component was found in the cached manual

preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 32. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

replacement

  1. Position computer upright, with the front toward you. (printed page 83).
  2. Open the computer as far as possible. (printed page 83).
  3. If it is necessary to replace display bezel: a. Close computer, position it so you can access bottom of display, and then open the computer slightly. b. (printed page 83).
  4. If it is necessary to replace display panel: a. Take out the four M2x3L P1 screws that hold the display panel to the display enclosure. (printed page 83).
  5. If it is necessary to replace hinge brackets, remove M2.5x2.5L P1 screws from each side, and then remove the hinge brackets (2). (printed page 85).
  6. If it is necessary to replace WLAN antenna cables, remove 3 screws from each side, and then remove the WLAN antenna cables (2). (printed page 85).
  7. If it is necessary to replace WWAN antenna cables (select products only, remove 3 screws from each side, and then remove the WWAN antenna cables (2). (printed page 86).
  8. If it is necessary to replace webcam: a. Detach the cable from the webcam. b. Detach the webcam from the display enclosure. (printed page 86).
  9. If it is necessary to replace microphone board: a. Detach the cable from the microphone board. (printed page 86).

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-650-g2-display-assembly-components-replacement-p83

Key facts

HP document part number
839485-001
Model
HP ProBook 650 G2
Release year
2015
Screen size
15.6"
Printed pages
83–86

Related