Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 650 G2. Confirm the exact model on the service label before starting.
HP ProBook 650 G2 Notebook PC top cover replacement. HP prints this procedure on printed page 66 of its maintenance and service guide.
tools and parts
- Flat-bladed drivers, Magnetic drivers and Phillips P0 and P1 drivers
- Static-safe work surface
- No spare part number for this component was found in the cached manual
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 32. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- If the computer is equipped with pointing stick (select products only) (printed page 66).
- Flip computer over, and then disconnect power button board cable (1), speaker cable (2), and fingerprint reader board cable (3). (printed page 67).
- Gently detach plastic clips on front edge, and then remove the top cover. (printed page 67).
- Put the top cover back by repeating the printed removal moves in the opposite order (printed page 67).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-650-g2-top-cover-replacement-p66