Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15u G6. Confirm the exact model on the service label before starting.
HP ZBook 15u G6 Mobile Workstation bottom cover replacement. HP prints the spare part table for this procedure on printed page 32.
Tools and parts
- Non-conductive, non-marking pry tool, a magnetic Phillips P1 driver and a Torx T8 driver
- Static-safe work surface
L64672-001- Bottom cover. Source: printed page 32.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 27. Its preparation for disassembly is on printed page 32: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Set the computer on its face on a flat surface. (printed page 32).
- Loosen the eight captive screws and the two inset captive screws that hold the bottom cover. (printed page 33).
- Starting under the middle of the display (printed page 33).
- Install the bottom cover by working back through the printed removal steps (printed page 33).
Part numbers in our catalog
- HP bottom cover L64672-001 (L64672-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15u-g6-bottom-cover-replacement-p32