Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15u G6. Confirm the exact model on the service label before starting.
HP ZBook 15u G6 Mobile Workstation system board replacement. HP prints the spare part table for this procedure on printed page 61.
tools and parts
- Non-conductive, non-marking pry tool, a magnetic Phillips P1 driver and a Torx T8 driver
- Static-safe work surface
L62760-001- Intel i7-8665U processor. Source: printed page 61.L62758-001- Intel i7-8565U processor. Source: printed page 61.L62759-001- Intel i5-8365U processor. Source: printed page 61.L62757-001- Intel i5-8265U processor. Source: printed page 61.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 27. Its preparation for disassembly is on printed page 32: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
- Get the computer ready for disassembly (Preparation for disassembly on page 32). (printed page 32).
- Take off the bottom cover (see that procedure on page 32). (printed page 34).
- Take off the battery (see that procedure on page 44). (printed page 54).
- Take off the keyboard (see that procedure on page 40). (printed page 59).
replacement
- Take out the RJ-45 board and bracket (see that procedure on page 51). (printed page 61).
- Take off the fan (see that procedure on page 59). (printed page 61).
- Position the computer upright (printed page 61).
- Take out the three Phillips M2.5 × 3.0 screws that hold the system board to the computer. (printed page 62).
- Close the computer and position it upside down. (printed page 62).
- Detach the following cables from the system board: (printed page 62).
- Take out the seven Phillips M2.5 × 3.0 screws that hold the system board to the computer. (printed page 63).
- Lift the right side of the main board up at an angle (1). (printed page 63).
- Pull the system board up (printed page 63).
- Install the system board by working back through the printed removal steps (printed page 63).
Parts this procedure uses
- HP Intel i5-8265U processor L62757-001 (L62757-001)
Part numbers in our catalog
- HP RJ-45 board with bracket L19421-001 (L19421-001)
- HP Pointing stick module (includes buttons, board, and bracket) L16643-001 (L16643-001)
- HP Power button board (includes cable) L65690-001 (L65690-001)
- HP NFC module L14385-001 (L14385-001)
- HP system board L62760-001 (L62760-001)
- HP system board L62758-001 (L62758-001)
- HP system board L62759-001 (L62759-001)
- HP Ambient light sensor board (includes double-sided tape) L62745-001 (L62745-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15u-g6-system-board-replacement-p61