Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 15u G6. Confirm the exact model on the service label before starting.
HP ZBook 15u G6 Mobile Workstation usb board replacement. HP prints the spare part table for this procedure on printed page 50.
Tools and parts
- Non-conductive, non-marking pry tool, a magnetic Phillips P1 driver and a Torx T8 driver
- Static-safe work surface
L65689-001- USB board. Source: printed page 50.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 27. Its preparation for disassembly is on printed page 32: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Get the computer ready for disassembly (Preparation for disassembly on page 32). (printed page 32).
- Take off the bottom cover (see that procedure on page 32). (printed page 34).
- Detach the battery cable from the system board (see that procedure on page 44). (printed page 34).
- Detach the lead from the ZIF plug on the USB board (1). (printed page 50).
- Take out the Phillips M2.0 × 3.0 screw that holds the board to the computer. (printed page 50).
- Lift the board out of the computer (3). (printed page 50).
- Install the usb board by working back through the printed removal steps (printed page 50).
Part numbers in our catalog
- HP USB board L65689-001 (L65689-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-15u-g6-usb-board-replacement-p50