HP ZBook Studio G4 display assembly replacement

Step-by-step HP ZBook Studio G4 display assembly replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you need936514-001HP 15.6-inch display panel 936514-001 for the HP ZBook Studio G4
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 53–61). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP ZBook Studio G4. Confirm the exact model on the service label before starting.

HP ZBook Studio G4 Mobile Workstation display assembly replacement. HP prints this procedure on printed page 53 of its maintenance and service guide.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • 921034-001 - 15.6-in, UHD, UWVA, Dream Color display assembly not equipped with a camera. Source: printed page 53.
  • 921035-001 - 15.6-in, UHD, UWVA, Dream Color display assembly equipped with a camera. Source: printed page 53.
  • 921036-001 - 15.6-in, FHD, UWVA display assembly with a touch screen. Source: printed page 53.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

replacement

  1. Detach the antennas from the WLAN module (1) (printed page 53).
  2. Take out the three Phillips PM2.5×4.0 screws that hold each hinge to the computer. (printed page 54).
  3. Open the computer as far as possible (2). (printed page 54).
  4. Separate the display from the computer (3). (printed page 54).
  5. If it is necessary to replace the screen bezel or any of the LED screen assembly subcomponents: a. (printed page 54).
  6. If it is necessary to replace the screen panel (printed page 55).
  7. If it is needed to substitute the camera unit or microphone unit: Remark: The camera unit as well as microphone unit are similar inside appearance and installed in the same location. (printed page 56).
  8. If it is needed to replace the thermal board (printed page 57).
  9. If it is necessary to replace the screen hinges (printed page 58).
  10. (UHD models only) If it is needed to replace the screen brackets: ▲ Raise the lower mount (1) and top bracket (2) out of the screen enclosure. (printed page 59).
  11. If it is needed to replace the wireless antennas (printed page 60).
  12. If it is necessary to replace the screen lead (printed page 60).
  13. Fit the replacement part by working back through the printed removal steps (printed page 61).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-studio-g4-display-assembly-replacement

Key facts

HP document part number
915648-001
Model
HP ZBook Studio G4
Release year
2017
Screen size
15.6"
Printed pages
53–61

Related