Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook 14 G4. Confirm the exact model on the service label before starting.
HP Chromebook 14 G4 display assembly replacement. HP prints this procedure on printed page 35 of its maintenance and service guide.
tools and parts
- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 screw driver
- Static-safe work surface
- No spare part number for this component was found in the cached manual
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 18. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Let go of ZIF connector to which display panel cable is attached, and then disconnect display panel cable from the system board. (printed page 35).
- Detach wireless antenna cables from WLAN terminals on system board and WLAN terminals on WLAN module. (printed page 35).
- Take out the two Phillips 2.0×4.0 screws that hold the display assembly to the base enclosure. (printed page 35).
- Take out the display assembly (4). (printed page 35).
- If it is necessary to replace display enclosure or any of the panel assembly subcomponents: a. Take out the two display bezel screw covers (1). b. Take out the two Phillips PM2.0×2.0 broad head screws that hold the display enclosure to the display panel assembly. (printed page 35).
- If it is necessary to replace webcam/microphone module: a. Detach webcam/microphone module from the display enclosure. (printed page 36).
- If it is necessary to replace display panel: a. Take out the four Phillips PM2.0×3.0 screws that hold the display panel to the display enclosure. (printed page 37).
- If it is necessary to replace display hinges: (printed page 38).
- If it is necessary to replace display panel cable: a. Detach display panel cable from webcam/microphone module. b. Release display panel cable from retention clips and channel built into top, left, and bottom edges of display enclosure. (printed page 39).
- If it is necessary to replace antenna cable: a. Peel to remove transceivers from top of display enclosure (1). b. Release cable from the retention clips and channel built into the side of the panel enclosure. (printed page 40).
- Put the display assembly back by repeating the printed removal moves in the opposite order (printed page 41).
Part numbers in our catalog
- HP 14-inch display panel 830015-001 (830015-001)
- HP 14-inch display panel 830016-001 (830016-001)
- HP Display Hinge Kit for in HP Chromebook models 830872-001 (830872-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-14-g4-display-assembly-replacement-p35